• GKrellM setup for new Ubuntu install

    From Adam@adam@no_thanks.com to alt.os.linux.ubuntu on Thu Apr 1 13:09:28 2021
    From Newsgroup: alt.os.linux.ubuntu


    Would like to setup GKrellM for new Ubuntu install but not sure whether
    any of the following will cause problems...


    xerus@ThinkPad-T430:~$ sudo sensors-detect
    # sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
    # System: LENOVO 2349US9 [ThinkPad T430] (laptop)
    # Kernel: 4.4.0-206-generic x86_64
    # Processor: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (6/58/9)

    This program will help you determine which kernel modules you need
    to load to use lm_sensors most effectively. It is generally safe
    and recommended to accept the default answers to all questions,
    unless you know what you're doing.

    Some south bridges, CPUs or memory controllers contain embedded sensors.
    Do you want to scan for them? This is totally safe. (YES/no): y
    Module cpuid loaded successfully.
    Silicon Integrated Systems SIS5595... No
    VIA VT82C686 Integrated Sensors... No
    VIA VT8231 Integrated Sensors... No
    AMD K8 thermal sensors... No
    AMD Family 10h thermal sensors... No
    AMD Family 11h thermal sensors... No
    AMD Family 12h and 14h thermal sensors... No
    AMD Family 15h thermal sensors... No
    AMD Family 16h thermal sensors... No
    AMD Family 15h power sensors... No
    AMD Family 16h power sensors... No
    Intel digital thermal sensor... Success!
    (driver `coretemp')
    Intel AMB FB-DIMM thermal sensor... No
    Intel 5500/5520/X58 thermal sensor... No
    VIA C7 thermal sensor... No
    VIA Nano thermal sensor... No

    Some Super I/O chips contain embedded sensors. We have to write to
    standard I/O ports to probe them. This is usually safe.
    Do you want to scan for Super I/O sensors? (YES/no): y
    Probing for Super-I/O at 0x2e/0x2f
    Trying family `National Semiconductor/ITE'... No
    Trying family `SMSC'... No
    Trying family `VIA/Winbond/Nuvoton/Fintek'... No
    Trying family `ITE'... No
    Probing for Super-I/O at 0x4e/0x4f
    Trying family `National Semiconductor/ITE'... No
    Trying family `SMSC'... Yes
    Found unknown chip with ID 0x0b03

    Some hardware monitoring chips are accessible through the ISA I/O ports.
    We have to write to arbitrary I/O ports to probe them. This is usually
    safe though. Yes, you do have ISA I/O ports even if you do not have any
    ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
    Probing for `National Semiconductor LM78' at 0x290... No
    Probing for `National Semiconductor LM79' at 0x290... No
    Probing for `Winbond W83781D' at 0x290... No
    Probing for `Winbond W83782D' at 0x290... No

    Lastly, we can probe the I2C/SMBus adapters for connected hardware
    monitoring devices. This is the most risky part, and while it works
    reasonably well on most systems, it has been reported to cause trouble
    on some systems.
    Do you want to probe the I2C/SMBus adapters now? (YES/no): y
    Using driver `i2c-i801' for device 0000:00:1f.3: Intel Panther Point (PCH) Module i2c-i801 loaded successfully.

    Next adapter: i915 gmbus ssc (i2c-0)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: i915 gmbus vga (i2c-1)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: i915 gmbus panel (i2c-2)
    Do you want to scan it? (yes/NO/selectively): y
    Client found at address 0x28
    Probing for `National Semiconductor LM78'... No
    Probing for `National Semiconductor LM79'... No
    Probing for `National Semiconductor LM80'... No
    Probing for `National Semiconductor LM96080'... No
    Probing for `Winbond W83781D'... No
    Probing for `Winbond W83782D'... No
    Probing for `Nuvoton NCT7802Y'... No
    Probing for `Winbond W83627HF'... No
    Probing for `Winbond W83627EHF'... No
    Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
    Probing for `Asus AS99127F (rev.1)'... No
    Probing for `Asus AS99127F (rev.2)'... No
    Probing for `Asus ASB100 Bach'... No
    Probing for `Analog Devices ADM1029'... No
    Probing for `ITE IT8712F'... No

    Next adapter: i915 gmbus dpc (i2c-3)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: i915 gmbus dpb (i2c-4)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: i915 gmbus dpd (i2c-5)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: DPDDC-B (i2c-6)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: DPDDC-C (i2c-7)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: DPDDC-D (i2c-8)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: SMBus I801 adapter at efa0 (i2c-9)
    Do you want to scan it? (YES/no/selectively): y
    Client found at address 0x50
    Probing for `Analog Devices ADM1033'... No
    Probing for `Analog Devices ADM1034'... No
    Probing for `SPD EEPROM'... Yes
    (confidence 8, not a hardware monitoring chip)
    Probing for `EDID EEPROM'... No
    Client found at address 0x5c
    Probing for `Analog Devices ADT7462'... No
    Probing for `SMSC EMC1072'... No
    Probing for `SMSC EMC1073'... No
    Probing for `SMSC EMC1074'... No


    Now follows a summary of the probes I have just done.
    Just press ENTER to continue:

    Driver `coretemp':
    * Chip `Intel digital thermal sensor' (confidence: 9)

    To load everything that is needed, add this to /etc/modules:
    #----cut here----
    # Chip drivers
    coretemp
    #----cut here----
    If you have some drivers built into your kernel, the list above will
    contain too many modules. Skip the appropriate ones!

    Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful!

    Monitoring programs won't work until the needed modules are
    loaded. You may want to run '/etc/init.d/kmod start'
    to load them.

    Unloading i2c-i801... OK
    Unloading cpuid... OK

    xerus@ThinkPad-T430:~$
    xerus@ThinkPad-T430:~$ cat /etc/modules
    # /etc/modules: kernel modules to load at boot time.
    #
    # This file contains the names of kernel modules that should be loaded
    # at boot time, one per line. Lines beginning with "#" are ignored.


    # Generated by sensors-detect on Thu Apr 1 12:54:32 2021
    # Chip drivers
    coretemp
    xerus@ThinkPad-T430:~$

    --- Synchronet 3.18a-Linux NewsLink 1.113
  • From Adam@adam@no_thanks.com to alt.os.linux.ubuntu on Thu Apr 1 13:15:51 2021
    From Newsgroup: alt.os.linux.ubuntu

    On 04/01/2021 01:09 PM, Adam wrote:

    Would like to setup GKrellM for new Ubuntu install but not sure whether
    any of the following will cause problems...


    xerus@ThinkPad-T430:~$ sudo sensors-detect
    # sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
    # System: LENOVO 2349US9 [ThinkPad T430] (laptop)
    # Kernel: 4.4.0-206-generic x86_64
    # Processor: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (6/58/9)

    This program will help you determine which kernel modules you need
    to load to use lm_sensors most effectively. It is generally safe
    and recommended to accept the default answers to all questions,
    unless you know what you're doing.

    Some south bridges, CPUs or memory controllers contain embedded sensors.
    Do you want to scan for them? This is totally safe. (YES/no): y
    Module cpuid loaded successfully.
    Silicon Integrated Systems SIS5595... No
    VIA VT82C686 Integrated Sensors... No
    VIA VT8231 Integrated Sensors... No
    AMD K8 thermal sensors... No
    AMD Family 10h thermal sensors... No
    AMD Family 11h thermal sensors... No
    AMD Family 12h and 14h thermal sensors... No
    AMD Family 15h thermal sensors... No
    AMD Family 16h thermal sensors... No
    AMD Family 15h power sensors... No
    AMD Family 16h power sensors... No
    Intel digital thermal sensor... Success!
    (driver `coretemp')
    Intel AMB FB-DIMM thermal sensor... No
    Intel 5500/5520/X58 thermal sensor... No
    VIA C7 thermal sensor... No
    VIA Nano thermal sensor... No

    Some Super I/O chips contain embedded sensors. We have to write to
    standard I/O ports to probe them. This is usually safe.
    Do you want to scan for Super I/O sensors? (YES/no): y
    Probing for Super-I/O at 0x2e/0x2f
    Trying family `National Semiconductor/ITE'... No
    Trying family `SMSC'... No
    Trying family `VIA/Winbond/Nuvoton/Fintek'... No
    Trying family `ITE'... No
    Probing for Super-I/O at 0x4e/0x4f
    Trying family `National Semiconductor/ITE'... No
    Trying family `SMSC'... Yes
    Found unknown chip with ID 0x0b03

    Some hardware monitoring chips are accessible through the ISA I/O ports.
    We have to write to arbitrary I/O ports to probe them. This is usually
    safe though. Yes, you do have ISA I/O ports even if you do not have any
    ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
    Probing for `National Semiconductor LM78' at 0x290... No
    Probing for `National Semiconductor LM79' at 0x290... No
    Probing for `Winbond W83781D' at 0x290... No
    Probing for `Winbond W83782D' at 0x290... No

    Lastly, we can probe the I2C/SMBus adapters for connected hardware
    monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble
    on some systems.
    Do you want to probe the I2C/SMBus adapters now? (YES/no): y
    Using driver `i2c-i801' for device 0000:00:1f.3: Intel Panther Point (PCH) Module i2c-i801 loaded successfully.

    Next adapter: i915 gmbus ssc (i2c-0)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: i915 gmbus vga (i2c-1)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: i915 gmbus panel (i2c-2)
    Do you want to scan it? (yes/NO/selectively): y
    Client found at address 0x28
    Probing for `National Semiconductor LM78'... No
    Probing for `National Semiconductor LM79'... No
    Probing for `National Semiconductor LM80'... No
    Probing for `National Semiconductor LM96080'... No
    Probing for `Winbond W83781D'... No
    Probing for `Winbond W83782D'... No
    Probing for `Nuvoton NCT7802Y'... No
    Probing for `Winbond W83627HF'... No
    Probing for `Winbond W83627EHF'... No
    Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
    Probing for `Asus AS99127F (rev.1)'... No
    Probing for `Asus AS99127F (rev.2)'... No
    Probing for `Asus ASB100 Bach'... No
    Probing for `Analog Devices ADM1029'... No
    Probing for `ITE IT8712F'... No

    Next adapter: i915 gmbus dpc (i2c-3)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: i915 gmbus dpb (i2c-4)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: i915 gmbus dpd (i2c-5)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: DPDDC-B (i2c-6)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: DPDDC-C (i2c-7)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: DPDDC-D (i2c-8)
    Do you want to scan it? (yes/NO/selectively): y

    Next adapter: SMBus I801 adapter at efa0 (i2c-9)
    Do you want to scan it? (YES/no/selectively): y
    Client found at address 0x50
    Probing for `Analog Devices ADM1033'... No
    Probing for `Analog Devices ADM1034'... No
    Probing for `SPD EEPROM'... Yes
    (confidence 8, not a hardware monitoring chip)
    Probing for `EDID EEPROM'... No
    Client found at address 0x5c
    Probing for `Analog Devices ADT7462'... No
    Probing for `SMSC EMC1072'... No
    Probing for `SMSC EMC1073'... No
    Probing for `SMSC EMC1074'... No


    Now follows a summary of the probes I have just done.
    Just press ENTER to continue:

    Driver `coretemp':
    * Chip `Intel digital thermal sensor' (confidence: 9)

    To load everything that is needed, add this to /etc/modules:
    #----cut here----
    # Chip drivers
    coretemp
    #----cut here----
    If you have some drivers built into your kernel, the list above will
    contain too many modules. Skip the appropriate ones!

    Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful!

    Monitoring programs won't work until the needed modules are
    loaded. You may want to run '/etc/init.d/kmod start'
    to load them.

    Unloading i2c-i801... OK
    Unloading cpuid... OK

    xerus@ThinkPad-T430:~$
    xerus@ThinkPad-T430:~$ cat /etc/modules
    # /etc/modules: kernel modules to load at boot time.
    #
    # This file contains the names of kernel modules that should be loaded
    # at boot time, one per line. Lines beginning with "#" are ignored.


    # Generated by sensors-detect on Thu Apr 1 12:54:32 2021
    # Chip drivers
    coretemp
    xerus@ThinkPad-T430:~$


    xerus@ThinkPad-T430:~$ sensors
    acpitz-virtual-0
    Adapter: Virtual device
    temp1: +41.0°C (crit = +200.0°C)

    thinkpad-isa-0000
    Adapter: ISA adapter
    fan1: 2573 RPM

    coretemp-isa-0000
    Adapter: ISA adapter
    Physical id 0: +43.0°C (high = +87.0°C, crit = +105.0°C)
    Core 0: +40.0°C (high = +87.0°C, crit = +105.0°C)
    Core 1: +42.0°C (high = +87.0°C, crit = +105.0°C)

    xerus@ThinkPad-T430:~$ sensors | egrep -i --color 'core|fan|temp'
    temp1: +42.0°C (crit = +200.0°C)
    fan1: 2580 RPM
    coretemp-isa-0000
    Core 0: +41.0°C (high = +87.0°C, crit = +105.0°C)
    Core 1: +44.0°C (high = +87.0°C, crit = +105.0°C) xerus@ThinkPad-T430:~$


    --- Synchronet 3.18a-Linux NewsLink 1.113